EPoSS - The Product Driven Platform

Testing & Verification

Up one level

EMC-lab

Description Picture
Current Use
Lab facility for EMC measurement
EMC-lab

Used by Swerea IVF industrial network partners and for research
RTO
Contact
Swerea IVF AB, Mölndal, Sweden (www.swereaivf.se)
Dr Hans Grönqvist hans.gronqvist@swerea.se


Environmental testing

Description Picture
Current Use
Lab facility for temperature cycling (-70°C – +150°C, and RT-1100°C), humidity testing
Environmental testing

Research projects and direct assignments for verification of designs and products
RTO
Contact
Swerea IVF AB, Mölndal, Sweden (www.swereaivf.se)
Dr Per-Erik Tegehall, per-erik.tegehall@swerea.se


Product ruggedization

Description Picture
Current Use
HALT/HASS (-100°C - +200°C) and up to 60 Grms,
Product ruggedization

Research projects and direct assignments for ruggedization of designs and products
RTO
Contact
Swerea IVF AB, Mölndal, Sweden (www.swereaivf.se)
Dr Per-Erik Tegehall, per-erik.tegehall@swerea.se


Environmental and Reliability Testing

Description Picture
Current Use
  • environmental conditions (temperature/humidity)
  • vibration and shock
  • pull/shear testing
Environmental and Reliability Testing

- in house testing
- available to industrial partners
RTO
Contact
Hahn-Schickard, Stuttgart, Germany www.hahn-schickard.de
Tobias Grözinger Tobias.Groezinger@Hahn-Schickard.de

EMC&RF test lab

Description Picture
Current Use
Shielded room made up of:
  • Equipment for testing conducted immunity in single phase and three-phase current, digital signals, communication lines, etc. EN61000-4-4/5/6/8/9 standards, etc.
  • Equipment for measuring conducted emission. EN 55014-1, EN 55022 standards, etc.
  • Equipment for ESD tests. EN 61000-4-2 standard, ISO 10605

EMC&RF test lab

Semi-anechoic chamber. EMC Pre-certification and Radio frequency tests
RTO
Contact
IK4-IKERLAN (www.ikerlan.es)                                          Iosu Gabilondo
igabilondo@ikerlan.es

 

Clean room laboratory

Description Picture
Current Use
  • Class 100 photolithography area
  • Class 1000 chemical bath area
  • Class 1000 process, characterisation and encapsulation area
Clean room laboratory


Development, prototyping and fabrication of small series in microfluidic, microsensors and packaging activities
RTO
Contact
IK4-IKERLAN (www.ikerlan.es)                                          Iosu Gabilondo
igabilondo@ikerlan.es

 

Reliable Embedded Systems Laboratory

Description Picture
Current Use
Platform for demonstration of the SIL4 (Safety Integrity Level - 4) system. Control elements in triplicate, based on FPGA (reprogrammable) type devices and high-performance Microprocessors (multicore). Operating systems, Hypervisors, Real time middleware.


Offers a space prepared for deployment and validation of research and product development applications based on Embedded Systems.
The laboratory consists of two separate areas. The first one recreates a domestic-residential scenario
RTO
Contact
IK4-IKERLAN (www.ikerlan.es)                                          Iosu Gabilondo
igabilondo@ikerlan.es

 

Document Actions





  • EPoSS © 2005 – 2018